![]() And then move on to the next step of installation. You need to remove all the exhaust fans that are very close to the brace of the IO shield. Check out every screw hole for the reinstallation of the fans. Once you remove the fan then you will be able to look at the braces (perpendicular lines on the IO shield panel) from every angle. Now the next step is to remove the exhaust or cooling fan. But the good thing is that there are bumps at the edges of the IO shield which can stop the shield from falling off and moving when there occur vibrations in the case of pc. Make sure the IO shield will not touch the Intel core or AMD RYZEN CPU when you insert and settle the IO shield or panel. When you install the motherboard with an IO shield then you must be sure about every second, you must check out its vibrations, the bumps, the falling, the shifting, and must have a look at whether it can keep all the things together in case you had to shift the computer. The second step is that be careful when you working on the sensitive components of PC, you must know everything. ![]() Once you confirmed its location then begin aligning the motherboard with the IO shield. Simply you must know about the location within your motherboard. Now you have to check its position over the motherboard. So you need to check the way into the socket of your CPUand the case of the PC. You must need to check out first where it can perfectly set on these cutout holes. The first and very important step is to insert the IO shield panel correctly, otherwise, it could be damaged if the IO shield panel goes in or out. The installation process of the IO shield doesn’t take much time install the IO shield panel is difficult but you can do a successful installation by following our set-by-step method: Step 1: Insert the IO shield correctly Steps To Install A Motherboard With An IO Shield The components that are attached to the IO panel are the HDMI port, the Ethernet connections, power supply unit, and USB ports, and most important is the motherboard. The task of an IO shield is to protect all the components which are attached to the IO shield and keep safe from to damage any part. There are IO shield braces which are perpendicular lines on the panel that holds the ports of your motherboard together. These shield tabs are found on the back of your pc case. There is a cutout hole on the computer case which is designed to install the IO shield. This little metal panel is complimentary with every commercial motherboard on the market nowadays. It is also called the IO shield tab or IO panel of the motherboard. IO shield is a short name that means “motherboard input-output shield”. Step 5: Last verify that everything is in place.Step 4: Begin the process of installation.Steps To Install A Motherboard With An IO Shield.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |